Temperature Controller IV

Product Price :Get Latest Price

Product Details:

Our rich industry experience from 1988, enables us to offer Data Loggers, Process Loggers, Temperature Data Loggers and Advanced Loggers. Moreover, we, Ajinkya Electronic Systems also offer Event Loggers, Data Acquisition System / Logger Software and Accessories for Data Loggers.

Product Price :Get Latest Price

Product Details:

IM 2500 Series Ampere Hour Meters are instruments for Battery Monitoring and Electroplating Applications. Numerous options and features make it highly versatile and suitable for various applications. Use of timer control in such applications is highly inaccurate. AH meter replaces the timer giving precise control and many more facilities. Battery charge / discharge monitoring Rectifier on / off control Rectifier control while plating of metals like Gold / Silver / Nickel etc. Doser control for adding additives and brightner.

Features:

• Micro controller based highly versatile and reliable digital circuitry.
• Dust proof membrane keyboard for programming.
• Ampere Hour / Ampere Min or Ampere Min / Ampere Seconds selection from keyboard.
• Four digit display for current count.
• One preset count with relay output at preset count.
• Shunt value programmable from keyboard.
• Floating decimal point, automatically selected depending on shunt value. One decimal resolution for shunt values below 25A.
• Battery back up to retain count in case of power fail.
• External Reset input to reset count.

Models:

• IM2501: 4 digit Ampere Hour Meter
• IM2502: IM2501 with 6 digit totaliser
• IM2503: IM2502 with doser control outputs for electroplating
• IM2505: 6 digit charge discharge Ampere Hour meter
• IM2506: 6 digit AH Meter
• IM2507: 4 digit charge discharge display AH Meter

Product Price :Get Latest Price

Product Details:

We offer IM 2502 ampere hour/minute meter which is advanced model of IM2501. Beside, from basic regular counting of ampere hour/minute or seconds, this one comes with totalizer. The totalizer is vital for all electroplating usages as this one manages the concentration of bath and also take care that over of additions of chemical. In addition to the, features of IM2501 like preset setting and relay output are integrating in this one as well. Moreover, there is an additional counter for total AH (ampere hour) or AM (ampere minutes) flowing through the circuit.

Some of the pertinent features of the product are mentioned below:

• Four plus 6 digit display
• Current (Ampere) display
• 6 digit totaliser
• 0.1 Ampere hour resolution for lower ampere shunt ratings
• One set point with relay output
• Memory retention in case of power failure

Product Price :Get Latest Price

Product Details:

Our range of IM2509 model ampere hour meter is provided with three control relay outputs to facilitate addition of three chemicals. It should be noted that this feature is improvement over the IM2503 model which offers two control relay outputs to control addition of two chemicals.

Some of the features of this model are provided below:

• 4 plus 6 digit displays for current flowing, totaliser and present ampere hour
• Three doser control relay outputs with programmable counts
• One set point with one control relay output
• Ampere hour / ampere minute selectable
• Shunt value programmable at 75 MV / 200 MV / 60 MV
• Ampere hour resolution for lower ampere shunt ratings
• Calibration output for ease of calibration
• IM2513 Master Slave Ampere Hour Meter for Doser Control (Master/Slave Unit)

This model is apt for the plants where so many jobs take place in the by engaging independent rectifiers in common bath. This IM2513 model is basically master controller that is joined to numerous IM2502 ampere hour meters and make to the totaliser counts which are according to hour meter. Also, relies on the net count. This one also manage the two doser relay outputs and chemicals like additive and brightener to the bath.

Features of this product are listed below:

• 6 digit ampere hour display
• Two relay outputs with set points for external doser control
• Up-to eight ampere hour meters can be connected
• Enable / disable of ampere hour meters connected
• Two wire RS485 interface between master and slave meters
• Distance up-to 500 to 1km between master and slave
• Connects up-to 8 ampere hour meters.

Product Price :Get Latest Price

Product Details:

The IM 2503 model integrates wholesome electroplating control which is convenient for the users. Two relay outputs which is used for controlling the addition of chemicals including additives and brighteners. During the entire process more charge is taken from the bath which results in the decrease of net concentration. Count of totaliser tell about the charge which is being drawn from the bath. After assessing the count, the ampere hour could be managed in sync with which chemicals can be added.

Features:

• One set point with relay output rated 230 V / 5 A (resistive)
• Two relay outputs for doser control which operates on totaliser count
• Ampere Hour / Ampere Minute selection
• Ampere hour resolution for lower ampere shunt ratings
• Shunt value programmable at 75mV
• External Reset facility

Product Price :Get Latest Price

Product Details:

We also Manufactures various kinds of displays like, Token Displays, jumbo displays, parameter display, pollution displays, bank displays, scrolling displays, message display etc. These Token Displays are one of the most useful product in our industries which are mainly used in banks, currency exchange counters, receptions, hospitals, clinics etc.

Product Price :Get Latest Price

Product Details:

Ajinkya multiple drink dispensing counters are specially designed for drink vending machines.

It has unmatched features like:

• Micro controller based highly reliable circuitry.
• Dust proof membrane keypad for programming.
• Supports three volumes for dispensing.
• Supports four to six drinks.
• Three independent 'start' switches for three volumes.
• Auto mode to set timings. Finer adjustments can be done from keyboard.
• Time is to be set for only one volume. Timings for other volumes calculated automatically.
• High accuracy and repeatability of timing as crystal controlled clock
• Six digit counters each for six drinks and three volumes.
• Permanent count storage irrespective of power conditions.

Product Price :Get Latest Price

Product Details:

Charge / discharge timers are same as life cycle timers with charging and discharge timings programmable. This device is useful for life cycle testing of batteries. It has programmable charge / discharge and delay timings. Number of cycles are programmable. It has option of Voltage / Current reading and data logging facility. Connecting to PC or direct printer to generate report as follows

Features of Life Cycle Timer

• Dust proof membrane keypad
• Charge / discharge / delay timing programmable in hours. minutes
• Number of cycles programmable
• Internal back to retain values in case of power fail
• Optional PC Interface
• Battery voltage / current logging
• Optional parallel printer interface.

Product Price :Get Latest Price

Product Details:

Transformer Ratio Meter is an instrument for measuring turns ratio of a transformer. The instrument does non destructive testing and transformer can be checked for accurate ratio without destructing the transformer.

Features:

• 4 1/2 digit LED display
• Turns ratio range selection
• Low voltage testing
• Portable light weight plastic cabinet
• Optional printer attachment for test report

Product Price :Get Latest Price

Product Details:

We also manufacture synchronizers for texturising machines, yarn length control system, electronic control system replacing the bulky mechanical gears and timing belt assemblies. Electronic control gives more precise speed control as well as flexibility to change the Drive ratios as and when required which is not easily possible in case of mechanical assembly.